tank section

An Experimental Investigation of Natural Frequencies of Liquid Sloshing in Comparted Tank of Part Cross Section with Up-protruding Common Bottom

上凸共底局部十字分隔贮箱中液体晃动的固有频率实验研究

The Optimal Operation of Well Network in Well Irrigation and Drainage Area Calculation of Draw off Valve Installed Position in the Tank Section

井灌井排区机井运行的优化调度罐区排水阀安装位置计算

This thesis makes research on the n# fuel tank section of some model plane in some company with the principle and technology of Work Research.

本文运用工作研究的原理和技术对某飞机制造公司某型号飞机n油箱段铆接装配生产线进行分析研究。

The application of blower fan in the defoaming of black liquor tank in the extraction section

风机用于提取段黑液槽消泡的探讨

Design and installation of the fireproof draw off valve in the tank section is the problem that the people little thought of always, although having some provision in related standard.

罐区防火排水阀的设计和安装始终是人们容易忽略的问题，虽然在相关的标准中有一些规定，如多数罐区排水阀都安装在紧贴防火墙外。

In this paper, a physical model of anaerobic tank section has been established in A2/ O treatment process of a sewage treatment plant. The numerical simulation and experimental methods were carried out for systematic study.

本文以某污水处理厂的A~2/O处理工艺为蓝本，建立了厌氧池段水力搅拌的物理模型，采用数值模拟和实验方法两种研究手段分别进行了系统的研究。

Some OPinions about Designing a Spherical Tank Section by Section

对球罐分带分瓣设计的几点看法

By the operational results, the optimum plan should be: 2 additional crystal seeding tanks and a single tank with section-changeable stiring paddle.

根据运行结果，提出最佳配置方案为：增加2台品种槽，选用单菜单槽配变截面搅拌桨。

The network formed by optic fiber sensor is able to realize the tank sections real-time monitoring, and assists in regular maintenance and management of the tank section.

而且，由光纤传感器构成的网络易于实现罐区的实时监控，并能辅助罐区的日常维护和管理工作。

Application Of The Optic Fiber Sensor In The Tank Section's Real-Time Non-Electric Monitoring System

光纤传感器在罐区无电实时监控系统中的应用

The forming process of the large _ section oblong rear sealing end tank was introduced.

介绍了大截面圆矩形后封头的成形工艺.

Thirdly, paper analyses in detail problems which exist in the current riveted assembly of the n# fuel tank section, proposes the improve measures against the existent problems.

第三，具体分析了n油箱段铆接装配生产线现行作业中存在的问题，针对存在的问题，提出了具体的改进建议，并形成了新的改进方案；

This test introduce one kind of electronic truck scale whose scale body structure is using steel plate to make the cold bending tank instead of section.

本文介绍一种用钢板制成冷弯槽替代型钢制作成秤体结构的电子汽车衡。

Calculation of Draw off Valve Installed Position in the Tank Section

罐区排水阀安装位置计算

Secondly, paper introduces the composition structure and the manufacture craft characteristic of airplanes, describes the structure and the main assembly process and the assembly characteristic of the n# fuel tank section, points out the assembly accuracy control of the n# fuel tank section.

第二，介绍了飞机的组成结构、飞机制造工艺的特点、n油箱段的主要结构、n油箱段的主要装配过程、n油箱段的装配作业特点和n油箱段的装配准确度的控制方法；

The test section is a rectangular tank with cross section 100mm × 40mm.

实验模型是水平截面为100mm×40mm的矩形容器。